How to flash and root Samsung Galaxy Ace S5830 Easy Way

How to flash and root Samsung Galaxy Ace S5830 Easy Way


in this tutorial I will show you how to upgrade and root your Samsung Galaxy Ace S5830. How to flash and root Samsung Galaxy Ace S5830 Easy Way


Shall not be liable for any resulting damage to your phone! Everything you do at your own risk!


You will need (most files are available below this post):

- PC with Windows XP SP2 or later

- .Net Framework 2.0 or later

- Samsung Galaxy Ace S5830

- USB to Micro-USB cable

- Samsung Kies (Official Samsung site: http://www.samsungapps.com/about/onPc.as)

- ODIN 4.38 (here: http://www.multiupload.com/MUBOZPEOS3)

- SuperOneClick 2.1.1 (here: http://forum.xda-developers.com/showthread.php?t=803682)

- New firmware (You must be registered on this page and remember to select appropriate region!: http://www.samfirmware.com/WEBPROTECT-s5830.htm)

- OPS file (You must be registered to download: http://www.samfirmware.com/WEBPROTECT-s5830.htm)

How to flash and root Samsung Galaxy Ace S5830 Easy Way
Newest firmwares:

Europe: S5830XWKPW with CSC - S5830OXXKPC (2.3.3) & S5830XWKB7 with MULTI-CSC-OXXKB6 (2.2.1)

Asia: S5830ZSKPD (2.3.4)

Africa/Arabic: S5830JPKP9 (2.3.3)

Provider: S5830XWKPU (2.3.3)

A. Preparing your phone (if you only want to root your phone, go to step C or D if you have 2.3.3):

If your phone have root (if your phone don't have root skip this steps):

1) Install Samsung Kies

2) Turn on your phone

3) Enable Debugging at Apliccations>Programming

4) Connect your phone into PC via cable

5) Launch SuperOneClick 2.1.1

6) Click "Unroot"

7) Wait

8) When the process is complete turn off SOC and unplug your phone

9) Reboot to apply changes

10) Now you have unrooted phone!

B. Flashing the newest firmware:


1) Turn off your phone


2) Remove your SIM Card and SD Card


3) Extract previously downloaded firmware


4) Open ODIN 4.38 on your PC


5) Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)


6) Connect your phone via USB into PC


7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode


8) If ODIN detected and recognised your phone should light up the first square to the left side


9) Press "Start" button and wait, the process should take ~5 minutes


10) If all goes well your phone should reboot automatically


11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware


12) Disconnect your phone


13) Turn off your phone


14) Insert your SIM Card and SD Card again


15) Turn on your phone


16) Now you have the newest firmware!




How to flash and root Samsung Galaxy Ace S5830 Easy Way
C. Rooting for 2.2.1:


1) Turn on your phone


2) Enable Debugging at Apliccations>Programming


3) Connect your phone into PC via cable


4) Launch Super One Click 2.1.1


5) Click "Root"


6) Wait until the program will root your phone


7) When the process is complete turn off SOC and unplug your phone


8) Reboot


9) Now you have root!




How to flash and root Samsung Galaxy Ace S5830 Easy Way
D. Rooting for 2.3.3/2.3.4/2.3.5 (Thanks to russian forum-user with nickname may213):


1) Download attached file called upd_1.zip and copy it to your sdcard


2) Turn off your phone


3) Press POWER+HOME BUTTON


4) Select update from sdcard, select the file upd_1.zip


5) After the update completed - reboot


6) Now you have rooted S5830




How to flash and root Samsung Galaxy Ace S5830 Easy Way
E. Unrooting for 2.3.3/2.3.4/2.3.5 (Thanks to ingbrzy):


1) Download attached file called unroot.zip and copy it to your sdcard


2) Turn off your phone


3) Press POWER+HOME BUTTON


4) Select update from sdcard, select the file unroot.zip


5) After the update completed - reboot


6) Now you have rooted S5830


How to flash and root Samsung Galaxy Ace S5830 Easy Way


Now you have the newest firmware and root!
How to flash and root Samsung Galaxy Ace S5830 Easy Way

Attached Files

	Cooper_v1.0.rar - [Click for QR Code] (241 Bytes, 5218 views)
	Odin_Multi_Downloader_v4.38.rar - [Click for QR Code] (257 Bytes, 5414 views)
	upd_1.zip - [Click for QR Code] (924.8 KB, 44646 views)
	unroot.zip - [Click for QR Code] (101.3 KB, 11186 views)

How to flash and root Samsung Galaxy Ace S5830 Easy Way

How to Flash Cyanogen Mod 7 on Galaxy Ace Easy Way

How to Flash Cyanogen Mod 7 on Galaxy Ace Easy Way

Before flashing CM7 on your Galaxy Ace.

Look at screen shots of CM7 here

What features will I get? How to Flash Cyanogen Mod 7 on Galaxy Ace Easy Way

A2SD native support. (You can Install Apps on SD card)

Super Fast UI speed (All menus opens super fast)

Nice graphic speed.

And no lag in browsing big sites with Opera Mobile.

Flash Player support, download here (Remember you can only play flash on default browser. Opera Mobile is not supported. And you can only see flash on websites, Cannot play YouTube videos, Browser Crashes while playing YouTube Videos)

If you liked CM7 than proceed to next step.

OK first flash your phone to unofficial Gingerbread here

How to Flash Cyanogen Mod 7 on Galaxy Ace Easy Way

Why I have to fall back to Unofficial Gingerbead?

Because If you flash CM7 on Official DDQ5 than 3G will not work.

OK If you have finished falling back than proceed to next stage.

Now download Clockwork Recovery here (Put Zip in SD Card)

Now go to Recovery Mode.

How to Flash Cyanogen Mod 7 on Galaxy Ace Easy Way

* Turn Off your Phone!

* Wait for phone to shut down!

* Now Press Home button (Keep it pressed).

* While you have pressing Home button, Press Power Button too.

* As your phone blinks Leave both buttons.

Now your phone is in Recovery Mode. (Select option "Apply Update from SD Card" by scrolling via Volume buttons)

Give OK with Home Button.

Now locate "Clockwork Recovery.zip" by volume and Home Buttons.

Now wait till it gets Installed.

Shut Down Phone.

Download CM7 here (Its Kooper-Kang, Most bugs are fixed) (Save it on SD Card)

Download all fixes like (Video Playback Fix, Headset Fix, ect) here (Everything is fixed) Its stable.(Save both Zips on SD Card)

Again Start Phone in Recovery Mode. (This Time you will notice all menus are different)

Select Install zip from SD card. (Remember :- Use Volume buttons for Scrolling and Home button as OK)

Select first option.

Now locate the downloaded CM7 zip and Install it.

Take a quick Nap till its getting Installed. (Zzz)

Again Select "Install zip from SD card." Locate The Fixes and Install it.

Reboot after CM7 gets Installed.

How to Flash Cyanogen Mod 7 on Galaxy Ace Easy Way

(Caution :- Your phone will not get bricked)

What are you looking here for now?

Go and play with your CM7.

How to Downgrading Galaxy ACE from CM7 to Gingerbread

How to Downgrading Galaxy ACE from CM7 to Gingerbread

First download flash files here. password - ekache99 ,Now start you

galaxy ace in downloading mode see video here.

First switch off your galaxy ace and press together (power + home + volume

down) keys and wow your galaxy ace is in downloading mode. Remove your SD

card. Now open downloaded archive and there will be a application "Odin Multi

Downloader v4.38.exe" open it, connect your Galaxy ace in downloading mode.

Odin will show com port after you connect your Ace.

How to Downgrading Galaxy ACE from CM7 to Gingerbread

After that can you see a option OPS in odin ya that one click it

and locate "Cooper_v1.0.ops" in flash files.

Click on BOOT and locate

"APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5".

Click Phone and locate

"MODEM_S5830XXKPH_CL260130_REV03.tar.md5".

Click PDA and locate

"CODE_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5".

Click CSC and locate

"CSC_S5830SERKPH_CL260130_REV03_user_low_true.tar.md5"

No need to do anything with EFS leave it blank.

Click start.

Till your phone is flashed take a 5 minute nap.

And when you wake up you will see your phone is started with

android 2.3.4

How to Downgrading Galaxy ACE from CM7 to Gingerbread

Now you can Install Official Gingerbread on This ROM or anything like FirstUA or Anyting can be Installed on this ROM.

How to Change Froyo or Gingerbread for Android

How to Change Froyo or Gingerbread for Android

Who Uses Which Version of Android?

When Android first came out, it was with version 1.5, nicknamed ‘Cupcake.’ These days, only 4.7% of all Android users are still using that version, and the follow on, version 1.6 or ‘Donut’ is not doing too well either, with only 7.9%.

Android 2.1, also known as ‘Éclair’ may be newer, but it has still only managed to retain 35.2% of all Android customers, and that figure is dropping fast.

The vast majority of Android users these days are, in fact, using Froyo, or Android 2.2. A whopping 51.8 percent of the users of Android devices are still using Froyo – mainly because it is the operating system that most of these devices are sold with. As for the latest version of Android, known as ‘Gingerbread,’ or 2.3, there are only 0.4% of all Android users who have already made the switch. How to Change Froyo or Gingerbread for Android

How to Get Gingerbread. How to Change Froyo or Gingerbread for Android

For now, there is probably no big rush to get Gingerbread on your Android phone. After all, Froyo was only released in May of 2010, and Gingerbread was officially launched in December of 2010, so both are pretty current.

The truth is that Gingerbread is being rolled out at different times on different phones, and with different carriers. Some phones, like the Nexus S, are being shipped with Android 2.3 already installed, but for the rest of us, it is going to be a matter of wait and see. There is also no official word yet whether everyone who has an existing Android phone will get the upgrade.

What is New in Gingerbread?

The list of improvements to the Android platform are impressive, and if the phones live up to the promises that Google has made about Gingerbread, then they’re going to be mighty fun to use. Some of the improvements Google has promised include:

Faster speeds, both online and off.

Better power management, which means a longer battery life.

Improved application management, which allows for better speed, and improved battery life.

An updated interface, with a new color scheme, redesigned keyboard, quick and easy cut and paste and more.

Improved download management, and better file management.

A whole lot of new camera tools and applications that allow easier use of front and rear cameras.

Internet calling, using SIP technology, which means lower costs (although this one is up to carriers.)

NFC or Near Field Communication, a new technology that allows super easy communication between compatible devices.

Sensors galore, and support for even bigger screens.

Basically, with Gingerbread, Google and its community of developers have taken everything that worked well on previous models, and made it better. So if you are an Android user, be sure to check the news to find out when you can get your hands on the latest Android – it is definitely an improvement on an already great platform. How to Change Froyo or Gingerbread for Android

How to Update Facebook from Twitter 1 Step Easy Way

How to Update Facebook from Twitter 1 Step Easy Way

There are a few ways to pipe your Twitter status updates right into Facebook, avoiding the need to double post items or spend a ton of time maintaining a dual-life on both networks.

Twitter to Facebook – This Facebook app simply sends all your Twitter updates right into Facebook as status updates with one important exception: @reply tweets will not appear.

Selective Twitter – If you’re looking for more manual control over exactly which Twitter updates make it over to Facebook, you might want to try this app instead. It only sends tweets at Facebook status updates if you include the hashtag #fb at the end of your message.

Twitter clients – Once you’ve set up either of the above Facebook apps to pipe Twitter into Facebook, you can of course use any desktop or mobile Twitter client to continue updating your Facebook status as well. How to Update Facebook from Twitter 1 Step Easy Way

How to Update Facebook from Firefox 1 step Easy

How to Update Facebook from Firefox

An easy to use Firefox extension called FireStatus can enable you to update your Facebook status right from a collapsible tray at the bottom of your browser. It also includes a URL shortening function as well, and you can set whether you’d like tinyURL or urlBorg as your short URL service in the preferences.

FireStatus can also handle updates to Twitter, FriendFeed, Delicious and Identi.ca as well, making it a handy method for updating any of those services if you’re already in your browser.How to Update Facebook from Firefox

How to Update Facebook From Outside Facebook 1 Step

How to Update Facebook From Outside Facebook 1 Step

Life moves pretty fast. Sometimes it moves so fast we just don’t have time to stop and maintain all of our social networks individually. But that’s no reason to leave your Facebook profile barren, because you don’t even have to make it all the way to Facebook to update your status.

Here are some methods of updating your Facebook profile when on the go or while using some of the other networks and services you already use. How to Update Facebook From Outside Facebook 1 Step

Samsung Galaxy S Gingerbread 2.3 Update

Samsung Galaxy S Gingerbread 2.3 Update. After a suspended update to Android 2.3, Samsung has finally released (this time for real) Gingerbread to its Galaxy S i9000 handset. Samsung Galaxy S Gingerbread 2.3 Update

The update first leaked out back in March. By mid-April, the 2.3.3 update came out in Europe but was then suspended due to some bugs in the release.

By first week of June, Gingerbread updates started rolling out in parts of Asia (Hong Kong got theirs around May 31 or June 1).

Don’t know which exact date the Philippines got Gingerbread but was able to update my Galaxy S yesterday without any problems. Just for up Samsung Kies (need to download new and install version and un-install old one) and get the updates rolling. Samsung Galaxy S Gingerbread 2.3 Update

Updated mine last June 8. Noticeable changes are the new look of the notifications area, better copy and paste (thanks to Gingerbread), and performance improvements especially when it comes to updating multiple apps simultaneously (less to no lags/FC).

Additionally, in Settings -> About Phone you will see “Software Update” menu as the first item in the list. Unfortunately, the service is not yet available for our country.

How to Reformat iPod Touch Easy Way

How to Reformat iPod Touch Easy Way

Steps to Reformat iPod Touch

Connect the iPod with your PC with a USB cable. Then synchronize it with iTunes. Go to the desktop of your PC and right click on the ‘My Computer’ icon and select ‘Manage’. Then select ‘Disk Management’ under the heading ‘Storage’. It may take some time to show all the options under it depending upon the hardware configuration of your PC. Then select the iPod, right click over it and choose ‘Format’. Once the formatting process is complete, disintegrate the iPod by stopping the device from the system tray ‘USB Mass storage device’ icon. Then start ‘iPod Updater’ from the ‘All Programs’ menu. Reconnect the iPod with the USB cable. Click on the restore button to make the formatting process completed. Now you can use your iPod just like you have purchased from the store.

Check this another method to reformat ipod touch: this way, without the hard formatting process, you will be able to restore the factory settings of your iPod. First you have to connect the iPod with your PC through a USB cable and synchronize it with iTunes. Then open the iPod management screen by clicking its icon. You can found that on the left side of the iTunes window. Then click on the tab marked as ‘Summary’. If your iPod management console is not updated for long, click on the ‘Check for Update’ button and update it from internet. Then click on the button marked as ‘Restore’ on the iPod management console. You will find this just below the ‘Check for Update’ button. Select ‘Yes’ when iTunes asks for confirmation for restoration of iPod. Follow the instructions provided by iTunes. Lastly, finalize the restoration by selection the synchronization settings. Your iPod is reformatted again.

Both methods above are still using iTunes to reformat your ipod touch. You could share here if you have better way to reformat ipod touch without itunes. How to Reformat iPod Touch Easy Way

How to Use Tumblr Easy Way FAST

How to Use Tumblr Easy Way FAST

Signing up for a Tumblr account and the basic steps to begin using the Tumblr platform to post and blog is described in this video. From account setup, customizing your blog page and posting to your page, this tutorial covers many of the basic features of the blogging site. For new bloggers, this video will cover simple steps that can be used to begin using this multimedia blogging software. .

Step 1: Register with Tumblr

You can sign-up on the homepage of the Tumblr site in three steps.2

Firstly, enter your email address in the first box.

Secondly, enter a password in the next box. Try and make it difficult for other people to guess but not so hard that you might forget it. It may be ideal to write it down in a safe place.

Thirdly, type in the URL of your preference before the ending domain of .tumblr.com. You can change the URL at any time and you can also add your own custom domain.

After entering this information, click the Sign up and start posting button underneath and this will take you to your Dashboard.

Step 2: Tumblr Dashboard

The Dashboard is where users can submit posts, read their posts and their friends posts. On the top of the page, there are seven icons for each of the various posts a user can submit. You can submit text, photos, quotes, links, chat, audio and video content.

On the sidebar, you will see information on your blog. When you click your URL link at the top, you will see all your posts and whether anyone has liked, reblogged your posts or started following you. Underneath is a link that takes you directly to your blog, then there is your tumblarity rank, any drafts that you have created, any posts that you have scheduled and a link which can allow you to customize the blog.

Step 3: Posts on Tumblr

On the Dashboard or on another person's Tumblr blog, you can see your own posts and other people's posts. On a person's post/post page, you will see the term reblog, a heart and possible some numbers with note(s) after it.

The heart stands for a like. When you see a post that you find interesting, whether it be a quote from Shakespeare or a image of the Eiffel Tower, click the heart button to show that you like it. Every time you like a post, their post will gain a note. When you clickreblog, their post is then put on your blog.

Once you have written a post, there are various options that you can do. You can submit your post to another blog, you can add to a queue which will schedule your post to be posted at a later date or set a date which you would like it to be published on, save it as a draft which you can edit later or publish private so that only you can see the post. You can then add tags to help make your post be found in the search engine, this will be especially helpful if your post is an image post.

Step 4: Customizing Tumblr

Click Dashboard in the top four links at the top of the page and then in the sidebar clickCustomize. Alternatively, you can visit your blog and click the Customize button in the top right hand corner.

You will have a taskbar on the top with five buttons. On the first button is Info, which can allow you to add a title and description which will be included in the description when search engines like Google list your blog. You can also add a portrait photo, which will be shown throughout Tumblr when you write a post or like/reblog. Additionally, you can edit your username for your Tumblr domain or add a custom domain of your own.

The next button, Theme, allows you to select one of the many free templates from Tumblr. You can also visit more Tumblr themes underneath by selecting Browse more themes. If you prefer to design your blog yourself, you can select Use Custom HTML.3One finished, click Update Preview to see how it looks like. Once happy, you can then click save button on the right. To further enhance your theme, the Appearance button may allow you to make further changes such as the color scheme for your blog.

The Services button can connect with programs such as Facebook and Twitter so that you can share your posts there. Finally, the Advanced button allows extra features such as the number of posts visible per page to be managed on your blog.

Step 5: Socialize with Tumblr

You can see lots of people's posts through the Popular page. A live streaming of people's posts from images to quotes will appear seamlessly. You can click a image or post and it will directly take you to the person's post page where you can like, reblog or become friends with the tumblr.

Becoming friends with users is easy. You can either search for users using the search bar at the top or using the Popular page to find other users. You may find that people find you as if you post something interesting, you will gain views.

Your tumblarity is how much you participate with Tumblr and is based on people liking, reblogging and becoming friends with you. The higher the tumblarity you are, the better your blog is. You can visit your tumblarity by clicking on the Dashboard, then on the sidebar where it lists your tumblarity. Additionally, you can see all the people that are following you and who you are friends with as well as seeing how you rank in the world (in the top 50,000) and locally.4

Step 6: New Blogs

You can create a new blog by clicking on the Dasboard and then on the sidebar, directly underneath all the links it should say Create another blog.5

Once clicked, you will be directed to a page where you add a title for the blog, as well as its URL and setting its privacy - all of which you can change at any time. Then click Create and you will then see your new blog's title appear directly underneath your current blog in the sidebar.

With your new blog, you can add members to your blog, who can also contribute though do not have complete control of the customizing tools. If you want them to control the blog, you can set them as admin.

To delete your new blog, click the Members button and then Leave this blog next to your username. How to Use Tumblr Easy Way FAST

How to personalize Facebook URL?

You can actually find it in Facebook General Information. You can personalize your Facebook URL (web address) by selecting any name that you want.

Step 1: Login to your Facebook account

Step 2: Go to Account settings

Step 3: Click Username and type the username that you want, i.e. " jdelacruz"

Step 4: Click availability, if it is not available then choose for another username.

Step 5: Save settings by typing your password into it and you're done.

This is the easiest way on how to personalize your Facebook URL.

How to Mod an Android Phone?

Android phones are infinitely customizable. Many android phone users "root" their devices which means they unlock the root directories to allow installation of developer firmwares. Just bear in mind that doing so can be risky as this will devoid the warranty of your device. So even without rooting your phone, you can do a lot of mods to enable your android customization a success.

For Mods that can be access without rooting, you can do the following steps:

Step 1: Go to Android market and install a different launcher.

Step 2: Tap the launcher of your choice.

Step 3: From the App drawer try to experiment with different icons by clicking and dragging it to the home screen.

Step 4: Download " Desktop Visualizer" from the android market to create new icons coming from the available photos in your SD.

Enjoy!

How to Install Flash on an Android Gingerbread?

Yes the Gingerbread version of Android is capable and well equipped with necessary hardware for running its Flash content however there is no official Flash player for its operating system. One way to enable this is to download Flash 10.2 APK for Honeycomb but the installation process differs because it will need you to use your PC.

How to install Flash on an Android Gingerbread?

Step 1: Extract the the APK file by clicking the Honeycomb Flash 10.2 file twice.

Step 2: Connect your Android Gingerbread phone to your computer via USC connector cable. Allow the device to mount.

Step 3: Copy the file you extracted and paste it in your android device.

Step 4:Open the Android Market app on your Android Gingerbread device, select “Search,” type “Astro File Manager” in the text field and press “Enter.” Tap “Astro File Manager” in the list of results and tap “Install.”

Step 5: Launch astro file manager on your device. Allow the device installation and click OK.

Step 6: Reboot your device after installation.

Enjoy!

How to find my Facebook ID?

When someone decides to sign up for a Facebook account, the system automatically designates a user identification number which is commonly called as " Facebook ID". Now for many business websites and other individuals a Facebook ID is very important as this is a tool in helping them link their website to their Facebook account.

How to find my Facebook ID? These are the following steps that you need in finding your Facebook ID.

Step 1: Log in to your Facebook account.


Step 2: Go to your profile page.

Step 3: Click on the tab "Photos" just below your name.

Step 4: You can click any photo in the album and once you can already see it, move your mouse to the URL bar in your browser.

Step 5: Move your cursor to the end of the URL, this is how to find your Facebook ID. Some URLs are short enough that the number will be visible immediately. There may be more than one series of numbers in the URL but don't worry, go on and find the set that follows "id=". That will be your Facebook ID.

How to make free coupons on Facebook?

Acquiring Facebook coupons can help Facebook users or business pages have an advertisement in Facebook. You can make free coupons on Facebook by joining forums and by browsing at Facebook's partner websites. This entry will help on how to make free coupons on Facebook.

1. Go to Qapacity.com. This is a website that helps people find something. If you sign up in this site, you will have a free €50 Facebook coupon. However these coupons are only limited to the following countries India, Japan, Germany, Holland, Poland, Portugal, Russia and Spain.

2. You can also go to Godaddy.com . It is a popular domain registrar and hosting service. If you decide to purchase their deluxe hosting service for one month you can be rewarded with free $50 Facebook coupon credit.

3. Last is the Nexx.com. It is a hosting service, where you can get a $50 Facebook coupon and a $50 Google AdWords Promotional Code with their one year hosting.

Enjoy!

How to enable Facebook Timeline?

Facebook Timeline -the new feature of Facebook, which includes archives that enables users to browse their past contents, photos, statuses and other activities through a timeline.

Can't wait to do it? So these are the following steps you need to do how to enable Facebook Timeline.

1. Log into Facebook

2. Type “developer” into the Facebook search box, click the first result and click Allow.

3. Jump into the developer app (if Facebook doesn’t put you there automatically, it should be in your left-hand tool bar)

4. Create a new app (don’t worry — you wont actually be submitting this for anyone else to see/use). Give your shiny new app any display name and namespace you see fit. Read through and agree to the Platform Privacy agreement. This is the step you need to be verified for.

5. Ensure you’re in your new app’s main settings screen. You should see your app’s name near the top of the page

6. Look for the “Open Graph” header, and click the “Get Started using open graph” link.

Create a test action for your app, like “read” a “book”, or “eat” a “sandwich”

7. This should drop you into an action type configuration page. Change a few of the default settings (I changed the past tense of “read” to “redd” — again, only you can see this unless you try and submit your application to the public directory), and click through all three pages of settings

8. Wait 2-3 minutes

9. Go back to your Facebook homescreen. An invite to try Timeline should be waiting at the top of the page and this is how to enable Facebook Timeline.

Enjoy!~

How to Download PDF reader in IPhone?

Downloading PDF reader in IPhone is not that difficult. You can have the option to use your PC and to download it straight from your IPhone. In search of the best PDF reader for IPhone I looked for something easy and of course free! In the quest for the best PDF reader for Iphone, I want to recommend the following: Aji Reader, iPDF and Dropbox.

These were so far the best PDF reader that can be installed in your IPhone. So how to download PDF reader in IPhone?

Step 1: Connect your IPhone using a usb cable into your PC.

Step 2: Search Aji reader, iPDF or Dropbox in your preferred search engine

Step 3: Download and install it in your Iphone.

In case you don't have any usb cable, you can just simply open your Iphone Web browser and search for Aji reader, iPDF or Dropbox for your PDF reader in IPhone. If you can't find it in the Android market, just download it from the Safari web browser. Install it and enjoy!